Network Camera & Live Cams Support

Step 1    Connect Microseven network camera to your local area network (LAN)

1. Connect Microseven network camera to power supply 12V DC.
2. Connect Microseven network camera through Ethernet to router or switch using Cat5E Ethernet cable.

Step 2     Install Microseven Camera Software

1. Install Microseven software from installation CD.
   *** Installation software can be downloaded from Microseven website (microseven.com) with your login account.
2. Insert CD to your computer.
3. Run ‘MicrosevenSoftwareFullversion3.xx.exe’, to set up Microseven camera software.

Step 3     Find camera in your network

1. Double click the shortcut icon  on your desktop to launch M7 cam locator.
2. Click on ‘Search’ button. Cameras in your local area network (LAN) will be shown on the lst.
3. Highlight the camera you want to set up and double click, then the ‘Camera Setup’ dialog will pop up.
4. Select ‘IP Type’ in the pop window. You must select ‘Static IP Address‘ in the drop down list.
5. There are default LAN settings with the Microseven network camera:
   - Default IP address is 192.168.1.201
   - Default gateway IP address is 192.168.1.1
   - Subnet mask is 255.255.255.0
   - Default device port is 9660
   - Default TCP/IP port is 80
   - Default password is ‘admin’
   - Default password is ‘password’

   Check your own gateway IP address and your own LAN IP address. Make sure your gateway IP address is the same as your LAN IP address. If you are not sure what your gateway and IP addresses are, please consult IT engineers.

   If you LAN wireless router gateway is 192.168.1.1, you can use default values above and set them up in your Microseven network camera.

6. Click ‘Apply’ button to finish.
7. There is a ‘Reset (factory)’ button if you want to your Microseven camera to factory default values.
8. Wait for about 15 – 20 seconds, and Microseven network camera will automatically reboot.

Step 4    Viewing the camera

*** To view camera with web browser (IE) ***

1. Enter the camera IP address in URL, URL is http://192.168.1.201 and hit enter, then Microseven camera web base system login page will be showed in the following.
2. To download ActiveX for camera, click on link of ‘Microseven IP Camera Web Software’, then install it.
3. After finishing your installation, type ‘Username’ and ‘Password’, and then click ‘Login’. Default Username and Password for web system is ‘admin / password‘.
4. Then live video will be shown in the following snapshot.

*** To view camera with Microseven camera software ***

1. Double-click icon  on desktop to launch Microseven camera software.
2. Type default User ID and Password ‘admin / password‘, then click OK to login to Microseven surveillance system in the following snapshot. Microseven network camera has not been added yet. Wee will now add camera location and camera information.
3. Click on ‘Camera Setup…’ button, and choose ‘Group Setting’ to add a new camera group (example, Los Angeles as first Group Name). You type Group Name in the field.
4. Click OK, then you have created Group Name in Group Setting.
5. Then you click on ‘Camera Setting’, select ‘Group Setting’, select a name in the drop down list and click OK
   again.
   
6. Type your IP address of camera or domain name, (example, you can type 192.168.1.201), Port is 9660, Channel goes CH1, Stream Type is Primary Stream.
7. Type your User ID and Password of your camera, default User ID is ‘admin’, and Password is ‘password’.
8. Then click ‘Add’. Then click OK.
9. Then click ‘Cancel’ on Microseven Camera pop window.
10. Now you have added Microseven network camera in the system.
11. Then you can see video in Microseven Software.