How to view Microseven network camera using Microseven software (M7CMS) on your PC?
Step 1 Double click icon 
on your PC desktop and it will pop up a Login window
Step 2 Enter User ID and Password.
Default User ID is: admin
Default password is: password
Note: the previous version Password was: admin.
Then a main window will be displayed in the following:
Step 3 Add camera group.
- Click on ‘Camera Setup…’ button.
- It will pop up window, select radio button on ‘Group Setting’, and then click OK.
- Then it will pop up other window, enter a group name, example ‘Walnut, CA’.
- Click ‘Add’ button, Group ‘Walnut, CA’ is added.
- Click OK to go back to Group Setting and Camera Setting pop window.
Step 4 Add camera(s).
- Select radio button on ‘Camera Setting’, select a group from drop down list, example ‘Walnut, CA’, then click OK.
- It will pop up a Camera List window, in the Group ‘Walnut, CA’, you will add camera(s) in the list.
- Enter the first camera IP address or its domain name.
For example, IP address is 192.168.1.201, then enter ’192.168.1.201′ in IP/Domain field.Port is ’9660′, Channel is ‘CH1′, Stream Type is ‘Primary Stream’, User ID is ‘admin’ and Password is ‘password’. These values are default from Microseven factory setting. You can enter your own values match your camera setting by your own.
- Then click ‘Add’, you will see the camera information is added. Then click OK.
- It will go back to Group Setting and Camera Setting pop window. To click Cancel to finish adding camera(s).
Step 5 View Microseven network camera using Microseven software on your PC now.
Please make sure the following things have been done Before you view camera on Microseven camera software:
- Connect Microseven camera(s) to your LAN network.
- Find your camera and its IP address with Microseven IP Locator.
For more details, please refer How to set up Microseven network camera?
