Network Camera & Live Cams Support

Step 1    SD card setup.

1. Double-click icon to open M7CMS.

   

2. Enter User ID and Password, our default User ID and Password are ‘admin‘ and ‘password‘.
3. Right click on the live camera screen to pull up the short-cut menu and select ‘Properties’, or click the camera name link of Camera List. Camera Setup Properties dialog pops up.
4. Go to ‘System > Storage‘ tab, to confirm your SD card on camera is available.

   Please make sure there is a SD card information in the tab.

5. Go to ‘Recording > Record Options‘ tab, recommandation values are:
   1. Disk full event: Overwrite
   2. Pre-record status: Off
   3. Recording file length (10-30): 10 mins
   4. Minumun hard disk space: 300 MB
   5. Dual stream: Off
   6. Then click ‘Apply‘.

Step 2    Camera motion detection setup.

1. Go to ‘Detection > Motion Detection‘ tab.
2. Click ‘Set motion detect area‘
3. Click ‘Select All‘ then click ‘OK‘.
4. Go back to ‘Detection > Motion Detection‘ tab.
   1. Check Recording ‘Channel 1′
   2. Check ‘Set motion detect on schedule‘
   3. Only ‘Set duration 1‘ to 12:00:00 AM to 11:59:59 PM
5. Click Apply.

   

6. Then click ‘Apply to everyday‘.
   
   
7. Exit properties configuration page and go back to main window.

Step 3    Record video to SD card when motion is triggered.

1. Trigger motion on.
2. While motion is detected, video will have red frame alert and the real video will be recorded to SD card.
3. The real videos of triggered moment are recorded to SD card.

Step 4    Query and playback recording videos on SD card.

Please refer How to use Microseven software to access to SD card for recording and playback?
Step 6 – Step 9.