Network Camera & Live Cams Support

Step 1    Double-click icon to open Microseven software.

Step 2    Enter User ID and Password, our default User ID and Password are ‘admin’ and ‘password’. Microseven main page pops up.

Step 3    Right click on the live camera screen to pull up camera short-cut menu and select Properties, or click the camera name of Camera List. Camera setup properties dialog pops up.

Step 4    Go to Camera > Email Settings tab.

Step 5    The example uses gmail.com information, Check ‘Apply to motion detection’.

1. SMTP server: smtp.gmail.com
2. Send from: microsevensystems@gmail.com
3. Account name: microsevensystems@gmail.com
4. Password: *******
5. Send to: support@microseven.com
6. Check Sending snapshot
7. Show ‘From’ as: Support Team
8. Subject: Test

Step 6     Click ‘Apply’ and then click ‘OK’.

Step 7     Go to Motion Detect tab.

Note: Sensitivity level, 1-9, 9 is the highest sensitivity.

Step 8     Click ‘Set motion detect area’, and motion detect area window pops up.

Step 9     Click ‘Select All’ then click ‘OK’

Step 10     Go to Detection > Motion Detection tab.

1. Check Snapshot ‘Channel 1′
2. Check ‘Set motion detect on schedule’
3. Only ‘Set duration 1′ to 12:00:00 AM to 11:59:59 PM

Step 11     Click Apply.

Step 12     Then click ‘Apply to everyday’.

Step 13     Exit properties configuration page and go back to main window.

Step 14     Trigger motion on.

Step 15     While motion is detected, video will have red frame alert and it triggers the email alert.

Step 16      You check your email inbox.

If you cannot receive emails, please check firewall if it is on, or you can check DNS need to be static.

For example, our company demo DNS is static DNS:

1. Primary DNS is 64.60.0.17
2. Secondary DNS is 64.60.0.18

Step 17      To change DNS from Dynamic one to static DNS, please go to tab ‘Network…’ on camera properties configuration page.

Step 18      Click ‘Apply’ to finish. You will receive emails when motion is triggerd.