Network Camera & Live Cams Support

Before you are ready for still image your website for your webcam, your Microseven network camera has been set up view on internet.
Then to do the following set up to embed still image on your website.

Step 1    Open M7CMS to view your camera.

Step 2    Right click on video and select Properties from shortcut menu or click camera name from camera list, for example ‘Los Angeles, California’. Go to next properties page.

Step 3     Go to Capture & Snapshot > Camera Built-in snapshot tab.

Step 4     Check on ‘Enable camera built-in snapshot’, and set up Camera built-in snapshot interval. (3 seconds is default and recommended)

Step 5     Then click ‘Apply’.

Step 6     Click OK on Camera built-in snapshot pop window, and click Close on ‘Configuration Settings’ window.

Then you need to copy embedded scripts to your html page in your website.

- ip=xxx.xxx.xxx.xxx: Your IP address, for example, ip=74.212.249.249

OR
- ip=xxx.xxx.xxx: Your domain name, if you have use dyndns.org domain name with your IP address, for example, ip=m7cam.microseven.com.

- Port: Port is web port number, for example 80
- Channel: Channel is from 1 – 4, for example 1 for you use it for camera only; if you have 4 channel encoder, you may need 4 channels, 1, 2, 3, and 4 for four different channels.

The following live embedded script code is Microseven demo:

OR

The single frame is: http://m7cam.microseven.com:7777/snapshot_ch01.jpg