Network Camera & Live Cams Support

Before you are ready for viewing still image on your cell phone, your Microseven network camera must have been set up for viewing on the internet. Then to do the following set up to embed still image on your website.

Step 1    Login to M7CMS.

Step 2    Right click on video and select Properties from shortcut menu or click camera name from camera list, then camera setup properties dialog pop up.

Step 3    Go to Capture & Snapshot > Camera Built-in snapshot tab.

Step 4    Check on ‘Enable camera built-in snapshot’, and Set up Camera built-in snapshot interval (default and recommended is 3 seconds)

Step 5    Then click ‘Apply’, you will see the Setup successfully message.

Step 6    Click OK on Camera built-in snapshot pop window, and click Close.

Step 7    View camera snapshot with your smartphone.

Enter the address:
http://www.microseven.com/webcam.html?ip=xxx.xxx.xxx.xxx&port=xx&channel=x&w=xxx&h=xxx
Or
http://www.microseven.com/webcam.html?ip=xxx.xxx.xxx&port=xx&channel=x&w=xxx&h=xxx
ip=xxx.xxx.xxx.xxx –> your IP address
ip=xxx.xxx.xxx –> your domain address if you have use dyndns.org domain name with your IP address

For example, the parameters for Microseven demo are:
ip = 74.212.249.249
port = 7777 (web port – no video port 9660)
channel = 1 (camera only is 1 default)
w = 352 (default)
h = 240 (default)

So, the demo link address is :
http://www.microseven.com/webcam.html?ip=74.212.249.249&port=7777&channel=1&w=352&h=240

Enter http://xxx.xxx.xxx.xxx:xx/snapshot_ch01.jpg

Microseven demo links:
http://www.microseven.com/webcam.html?ip=74.212.249.249&port=7777&channel=1&w=352&h=240
http://m7cam.microseven.com:7777/snapshot_ch01.jpg