Microseven M7CMS for Mac v1.0.2 (release note on 6/10/2012)
“PRE” for preset position of pan, tilt and zoom setting up on PTZ high speed dome camera.
It has been added an icon on camera in camera list with on/off with crosshair (reticle) OSD (on-screen display) on screen.
Refer to Microseven M7CMS for Mac v1.0.1.
M7CMS for Mac requires Mac OS X 10.7 or greater.
Step 1 Download M7CMS.dmg from www.microseven.com or from App Store
Download M7CMS, you can download it from www.microseven.com or from App Store.
Step 2 Install M7CMS.dmg
Install M7CMS.dmg, click file M7CMS.dmg, you will find pop window in the following:
M7CMS for Mac
Then move M7CMS icon to Application.
Step 3 Open M7CMS on your Launchpad
Open M7CMS on your Launchpad, click on M7CMS icon to open M7CMS
Step 4 M7CMS window opened
Button To left
Button To right
Button Start cruise
Button Stop cruise
Button Return to default preset
Step 5 Add cameras in M7CMS.
A pop window up, search camera in local network click on Search button
Do search click on Search button, if camera is on the network you will find it
To change IP address of the camera, click on Setup click, it will lead you to the next page
After finding camera, click on add, then cameras have been added in the following screen shot
Add camera name into the field, enter the password if you are going to use your own password
Then click on Close button, you will get the following screen shot before you click on connect link
Step 6 Change properties of the camera
Starting live video in M7CMS by click on the link (a little link icon)
Then video is up running …
Click on Properties link, if you video is not show up
Properties – Network setting page, you will modify the IP address and their ports in this page