Microseven Tech Support

To install SD card to M7-RC550, the SD card drive is inside of camera from back cover.
I. Hardware installation

Step 1. unscrew two screw on the back cover.

M7-RC550 network camera

Step 2. go to unscrew on the back of the camera.

Microseven M7-RC550 network camera installing SD card

Step 3. open the cover.

M7-RC550 network camera installing SD card

Step 4. insert SD card to the SD card drive.

M7-RC550 network camera to install SD card

Step 5. go to M7CMS software to configure SD card. Click on “Local Record …”

Microseven M7CMS

Step 6. go to storage tag, you will find your storage SD card in the list which automatically detected by the camera system. Highlight it, check on partition button, then wait until it is finished. Then click on format button, until it is finished. It may be taking 1 minute to finish. Before you make recording, it will be initialized by the system about 1 – 2 minutes.

You complete your installation of SD card in M7-RC550WS.

Microseven Network Camera