Microseven Tech Support

Tech Support

Archive for July, 2014

How to Install M7D12 And M7B15 IP cameras?

without comments

I have request for a YouTube video how to set up an installation of both cameras. To install the camera, there is Ethernet connection (RJ45) and power connection (12V DC) on the camera, power supply coming with the camera. If there is no power source on the location of camera where it needs to install, you can use PoE splitter set (pairs) to connect to camera. Camera end will have PoE and other end will be provided 12V DC and Ethernet from router/switch. PoE pairs are coming with camera package.

The camera view angle is about 77-90 degree, HD 1280x960P. If you want to view video local or remote, set up is about a couple of minutes, to give the software frame camera CamID and PIN (4 digits). Then the live video is playing.

Email, FTP, Motion Detection, Recording on local PC or Network Video Recorder are available from camera. Camera embedded three streaming available from large to small to fit your Internet bandwidth if you concern your local bandwidth.

Written by microseven

July 26th, 2014 at 9:42 am

Posted in How To