microseven Why doesn’t the camera show on the Edge browser? I open the camera from Cam Locator, and Edge browser is popped. The screen is blank and no Microseven camera interface I can see. To fix the problem, click here and go to Microsoft TechNet to find the solution. You can go to Control Panel -> … Continue Reading
How to make motion zones in the app to prevent and reduce false motion alerts? The zones are selected, and the motion switch is on. Step1: Go to settings and click it. Step2: Click ‘Motion Detection’ in the Camera Properties. Step3: Select ‘Motion detection zones’. Step4: 1. Make zones. 2. Click the ‘Save’ icon to … Continue Reading
Is the sd card readable on the Mac OS after pulled out from the camera? The answer is: No. At least on my macOS High Sierra Version 10.13.6. The hardware is MacBook Pro (15-inch, Late 2011) is not working. It may be the hardware SD card slot is not compatible.
How to adjust the time zone (camera timestamp)? You go to the camera system via a browser. Then go to “CAMERA” -> “Name & Time” page. Select the Time Zone in the dropdown list and click “APPLY” to save the Time Zone setting.
How to find M7B77-WPS v2 firmware and download it? Step 1: Go to the microseven.com site and click on ‘Firmware & Software’ to find the link. Click on the link Step2: From the dropdown list, select MYM71080i-A. Enter your email address and ‘Read,’ then go to click on “DOWNLOAD.” An email link will send to your … Continue Reading
How to set a motion detection recording on NVR (version 2.0)? 1) Click on the right mouse button to open a menu window. Go and click on ‘Configure’. 2) Click on the ‘Event Setup’ option. 3) The ‘Event Setup’ window is opened, select ‘Motion Detection’ from the dropdown list. 4) Select ‘Enable’, event record ‘CH01’ … Continue Reading
How to make and schedule the NVR (version 2.0) auto reboot? 1) Use the mouse right button click on the screen to bring up a pop-up menu. Then click ‘Configure.’ 2) Once the ‘System Setup’ window is opened. Select the ‘Auto Reboot’ mode option.
How to view the playback videos on NVR (version 2)? 1) Use the mouse, click on the right button on the mouse to open a pop-up menu window. And left button click on ‘Playback.’ 2) To find the right playback video, you can select the Calendar. 3) Next, you can select a camera or ‘All’ … Continue Reading
How to backup a playback on your computer from NVR (version 2.0)? Before you back up the videos from NVR to your Windows PC, you have to do the following steps: a) You need to download the NVR windows software from the NVR or from microseven.com, here is the link and download from microseven.com. Then … Continue Reading
How to activate cloud storage? Step1: Go to www.microseven.com, log in to your portal, if you do not have an account, you can create one. Go to ‘My Cameras’ -> ‘Cloud Record Settings’ -> ‘Add a new plan’ -> select a cloud storage version. You have three cameras per request, and it is unlimited. Step2: … Continue Reading
Capture & snapshot page is not for motion alert option settings If you want to get an email from motion alert, this page is not for it. You don’t check on the box “Enable auto capture to Email”.
Download How to install M7D77-PTZV20X-WPSAA pan-tilt-zoom security camera 1. Bracket installation: The camera harness cable has to go through the bracket. There are three screws for the bracket top to tie the bracket and camera. 2. What comes within the package: 3. Install the MicroSD card. Use PH1 x 60 unscrew back panel 4x … Continue Reading
How to remove the free version and activate subscription of cloud recording for 3x cameras 1) Go to ‘My Cameras’ -> ‘Cloud Record Settings’. 2) Click on ‘Add a new plan…’ to purchase a plan… 3) Go back to ‘My Cameras’ -> ‘Cloud Record Settings’ page. 4) In the ‘Action’ column click on ‘Remove’ link … Continue Reading
How to find an NVR IP address to download NVR (version 2.0) tools There are two ways to find the NVR IP address: 1. Go to your NVR monitor, use a mouse click on “i” System Information and find the NVR IP address: 2. You can use a cam locator to find the NVR IP … Continue Reading
1. Find the Microseven security camera IP address in the local network. 2. Add the camera to Synology NAS, Enter the camera IP address. Select ONVIF generic camera. The ONVIF port for the Microseven camera is 8080, you can find the ONVIF port information in the camera settings, CAMERA -> ONVIF Settings page. [Microseven 1080p … Continue Reading
How to copy & paste the embed code to your site Go to log in your account in www.microseven.com. Then go to “My Camera Settings”, click on “Embed” link on the column “Live Stream Status HTML5”
How to view the alert clips on the app 1. Tap on “Settings” 2. Tap on “Alert History With Clips” 3. Tap on the clip you want to view and play … 4. Tap on “Download icon” to the phone.
How to record the video on NVR (version 2.0) with audio? 1. You have to select a digital in the dropdown while you are adding a camera. 2. You have to check the audio box in the recording setting.
Hardware setup 1. Get a monitor ready. 2. Connect a HDMI cable to the NVR from the monitor. 3. Connect an Ethernet cable to the NVR from router. Connect a mouse to the USB on the NVR. 4. Connect the power cord to NVR to start the boot screen and wait for 60 seconds. 5. … Continue Reading
The URL of two 5MP cameras – M7B5MP-POE and M7D5MP-POE: http://192.168.1.214/jpgimage/1/image.jpg [192.168.1.214] = [camera_ip_address] If you do not want the camera enter in the pop up window every time while you are using the URL, you can set the credential in the URL: http://[username:password]@[camera_ip_address]:[http_port]/jpgimage/1/image.jpg Example: http://admin:[email protected]:80/jpgimage/1/image.jpg
