microseven

How to find the SD card slot on the camera: 1. Open the cover from the button of the camera using the PH1 screwdriver. 2. You can locate the SD card slot after open the cover.

How to adjust night-vision blur on dome camera from the glass: The video looks like before the adjustment: The video is in the color mode: You will adjust the flood-light close by the camera away from the camera dome glass to prevent the flood-light shooting in the camera through the glass. The video adjusted in … Continue Reading

How to add a camera in Blue Iris that can control the PTZ function in the Blue Iris software. You will need ONVIF to do it. 1. Add a new camera, enter the full name and short name, then select “Network IP” in Type. 2. Use Cam Locator to find the camera IP address. The … Continue Reading

How to find clips in the SD card using the phone app? 1. Tap on the “Settings”. 2. Tap on the “SD Card” menu in the Camera Properties settings screen.

How to find the clips from SD card Using macOS? 1. Run the CMS on the macOS. Go the select the camera, and click on the properties icon to open the properties screen. 2. Move to the tab “Record Query”, then click on “Query” to find the clip. You can do an inline play and … Continue Reading

How to make Video Preservation (Hour) unchecked. 1. Go to “Configure” [move the mouse on the monitor screen and right-click on]. 2. Select “Storage” in the Configure menu screen. 3.  Uncheck, and leave the “Video Preservation (Hours)” blank. Default is unchecked.

How to upgrade NVR firmware using your PC 1. Run the Cam Locator software on your PC. Find the NVR local IP address. For example, here it is 192.168.1.203. The default port is 80. 2. Run iWatch software on the PC. You can download it from the NVR or you can download it from microseven.com. … Continue Reading

There are a couple of ways to find the camera CamID. 1)  Find the CamID from the label. 2) Find the CamID from the camera’s web dashboard. 3) Find the CamID from Cam Locator software.

The best tool for scanning Wifi Signal is Netspot. It helps you to find the Wifi signal and remove the dead spot. You better use a mesh wifi system. It will keep the strong signal and deliver the live stream package as well. And it allows the surveillance cameras to stream smoothly and records the … Continue Reading

The audio input type is “Line in” in PTZ Optical Camera audio settings.

The base size is 4 1/2 X 3 inches.  

1. Find your target folder where you want to record to on the computer C: drive. Select it and use the right mouse to click on it. Then click on “Properties” 2. Select users where you are login into the computer or group. Then you will change the status to “Full control” and save it.

  It is in the doc I sent to you, use 103 RECALL. We were doing 103 PRESET. You will do Step1: Enter 103 RECALL to stop the human tracking function. Step2: Setup several positions and by entering a number from 1 – n and tap PRESET after each number to allow camera cruise, max … Continue Reading

1. Default as audio ON in the embed code: In this scenario, the audio is ON. When the user will hear the audio while the page opens. If you want to play the live streaming video, you have to click on the PLAY icon on the video. You will add the parameter “muted” and value=”false” … Continue Reading

How to test the camera with your PC 1. Turn off your laptop wifi if you have wifi on. 2. Power on the camera using a power 12V DC adapter. Connect the camera to your PC ethernet port via a Cat5E cable. Make sure the power on the camera and ethernet cable connected to the … Continue Reading

The camera power assumption: Stationary camera max assumption: 300mA 12V DC 4W.  It uses the POE 802.3af 15W switch for the stationary camera. PTZ optical camera max power assumption: 20W. It uses the POE+ 802.3at 30W Poe switch.

Open the CMS on the desktop. Click on ‘Configuration’ to open the System Configuration pop-up window. Check on ‘Remember UserID and Password when I start M7CMS’. Next, enter the admin password. Then click ‘OK’. You won’t get the login password pop-window at your next running the CMS on your PC.

1. Reboot the camera from your phone app. 2. Reboot the camera from Cam Locator. 3. Reboot the camera from the system on the browser.

Use a microSD card tester software: H2TestW Run a test to find if the microSD card goes bad.