How To Make And Schedule The NVR (v2) Auto Reboot

How to make and schedule the NVR (version 2.0) auto reboot? 1) Use the mouse right button click on the screen to bring up a pop-up menu. Then click ‘Configure.’ 2) Once the ‘System Setup’ window is opened. Select the ‘Auto Reboot’ mode option.

How To View The Playback On NVR (v2)

How to view the playback videos on NVR (version 2)? 1) Use the mouse, click on the right button on the mouse to open a pop-up menu window. And left button click on ‘Playback.’ 2) To find the right playback video, you can select the Calendar. 3) Next, you can select a camera or ‘All’ … Continue Reading

How To Backup A Playback On Your Computer From NVR (v2)

How to backup a playback on your computer from NVR (version 2.0)? Before you back up the videos from NVR to your Windows PC, you have to do the following steps: a) You need to download the NVR windows software from the NVR or from microseven.com, here is the link and download from microseven.com. Then … Continue Reading

How To Activate Cloud Storage

How to activate cloud storage? Step1: Go to www.microseven.com, log in to your portal, if you do not have an account, you can create one. Go to ‘My Cameras’ -> ‘Cloud Record Settings’ -> ‘Add a new plan’ -> select a cloud storage version. You have three cameras per request, and it is unlimited. Step2: … Continue Reading

How To Install M7D77-PTZV20X-WPSAA Pan-Tilt-Zoom Security Camera

 Download How to install M7D77-PTZV20X-WPSAA pan-tilt-zoom security camera 1. Bracket installation: The camera harness cable has to go through the bracket. There are three screws for the bracket top to tie the bracket and camera. 2. What comes within the package:   3. Install the MicroSD card. Use PH1 x 60 unscrew back panel 4x … Continue Reading

How To Add A Camera To Synoloy NAS

1. Find the Microseven security camera IP address in the local network. 2. Add the camera to Synology NAS, Enter the camera IP address. Select ONVIF generic camera. The ONVIF port for the Microseven camera is 8080, you can find the ONVIF port information in the camera settings, CAMERA -> ONVIF Settings page. [Microseven 1080p … Continue Reading

How To Copy & Paste The Embed Code To Your Site

How to copy & paste the embed code to your site Go to log in your account in www.microseven.com. Then go to “My Camera Settings”, click on “Embed” link on the column “Live Stream Status HTML5”

How To Record The Video On NVR (v2) With Audio

How to record the video on NVR (version 2.0) with audio? 1. You have to select a digital in the dropdown while you are adding a camera. 2. You have to check the audio box in the recording setting.

How To Set Up The NVR v2

Hardware setup 1. Get a monitor ready. 2. Connect a HDMI cable to the NVR from the monitor. 3. Connect an Ethernet cable to the NVR from router. Connect a mouse to the USB on the NVR. 4. Connect the power cord to NVR to start the boot screen and wait for 60 seconds. 5. … Continue Reading

What Is The URL Of Two 5MP Cameras

The URL of two 5MP cameras – M7B5MP-POE and M7D5MP-POE: http://192.168.1.214/jpgimage/1/image.jpg [192.168.1.214] = [camera_ip_address] If you do not want the camera enter in the pop up window every time while you are using the URL, you can set the credential in the URL: http://[username:password]@[camera_ip_address]:[http_port]/jpgimage/1/image.jpg Example: http://admin:password@192.168.1.214:80/jpgimage/1/image.jpg

RTSP URL

RTSP URL RTSP://[username]:[password]@[camera_ip_address]:[rtsp_port]/11 /11 is a primary stream /12 is a secondary stream Example: RTSP://192.168.1.203/11 If the camera IP address is 192.168.1.203 — The discontinued model: RTSP://[username]:[password]@[camera_ip_address]:[rtsp_port]/stream0 /stream0 is a primary stream /stream1 is a secondary stream